Home › Heater Kits › Marine Hot Air Heater Kits 3.5kw

2 x MY30 Marine + 8 hot air outlets

Part No: 2MY30-M8

THIS PRODUCT IS NO LONGER AVAILABLE. We now offer an equivalent product here.

For boats over 42ft it is recommended to use two MY30 heaters, these would normally be set up so that one heats the aft and part saloon and the second one heats the forward area and part saloon. This type of installation tends to work better than using one large air heater.

The Mikuni MY30 is a proven performer for its reliability and quiet operation.

The two compact diesel heaters in this kit both have a powerful 3.5kw output and a 1.7kw half-setting for comfort and economy.

Each heater is operated by an individual solid state thermostat control.

This system can be upgraded with the addition of a programmable timer.
(See below for programmable timers available)

Kit Contents

2 x MY30 Heaters
(choose 12v or24v)

2 x Inlet silencers with combustion air tube (.5m)

2 x 28mm combined stainless steel exhaust and silencer (2m long) and lagging
(choose stainless steel or brass skin fitting exhaust outlets)

2 x Fuel pumps with stand pipes and filters, fuel line (5m) and all rubber connectors
(choose plastic or copper fuel line)

2 x Controllers, wiring looms and thermostat controls

2 x Stainless steel bulkhead mounting brackets

2 x 80mm Open 360º directional hot air outlets

6 x 80mm Open/Close 360º directional hot air outlets

6 x 80mm Y branch fittings

20m of 80mm hot air ducting

All clips and fixings for a full installation

Options

Exhaust terminals are available as a flush fitting stainless steel skin fitting or hard wearing brass hull fitting.

Fuel lines are available in plastic for offshore craft or copper for inland craft.

Select the voltage suitable for your electrical system.

Quantity:

Price: £2,573.62 £3,088.34 inc VAT